The most awesome open boat cruising adventures in Maine and beyond! Sea Pearl 21 SCOUT camp cruises and gunkholes up and down the New England seascape leaving absurdity in her wake. Some duckpunting, too! Quickly, fellow sailors-- to the Sea! I,AZP/Goat Island Skiff specific posts run from May 2009 to May 2014
Thursday, August 13, 2009
Cut out bulkheads and transom
In 2:10, I cut out, planed to acceptable limits, and slobered over the fact that I have cut out the remaining major parts for the hull-- bulkheads and transom. Daggerboard case and seats still remain, but for the most part, I see lots of part that look like boat! YES! I jigsawed out the BH's, and planed them carefully to the lines, with a little room left over to sand down by hand. The hand plane is awesome, but it rips out the inner ply at the corners, so I have some empty corners on my BH's, nothing that some epoxy won't fill in.
She arrives! Booya!
Subscribe to:
Post Comments (Atom)
is that a to-be scarf joint I spy?
ReplyDeleteProbably not.
ReplyDelete