Cut out bulkheads and transom

In 2:10, I cut out, planed to acceptable limits, and slobered over the fact that I have cut out the remaining major parts for the hull-- bulkheads and transom. Daggerboard case and seats still remain, but for the most part, I see lots of part that look like boat! YES! I jigsawed out the BH's, and planed them carefully to the lines, with a little room left over to sand down by hand. The hand plane is awesome, but it rips out the inner ply at the corners, so I have some empty corners on my BH's, nothing that some epoxy won't fill in.

She arrives! Booya!